Sherwood – Armada XP Development Kit


The Sherwood Development kit is a Highly Integrated Multi-core ARMv7 based SOC development/evaluation platform based on the high performance Marvell’s Armada XP MV78460 ARMv7 Quad core with integrated 2MB L2 cache that can runup to 1.6 GHz.
The module comes as a complete development kit, including a carrier card offering access to the various SoC interfaces. The system enables users to design and develop innovative embedded products based on Marvell's MV78460 processor. The system has 2GB (256M x8) DDR3 RAM and 4GB NAND Flash. The System can be used by developers as is, or Pactron can provide customized industrial designs, hardware and software for your specific needs.


Sherwood Com Express and Test Carrier Block Diagram

Part Number : Sherwood





    The system supports the following features:

  • Linux 3.2.34 ARM Linux Kernel
  • 64 bit DDR3 SDRAM running at 667 MHz clock rate + 8 bits of ECC
  • 8-bit 4GB NAND flash boot support
  • 2 SATA Hard Drive Interfaces
  • 4-bit SD Card Interface
  • Two 10/100/1000Base-T interfaces, via RJ45 connector, based on Marvell 88E1510 PHY
  • Six PCIe x1 Mini-PCIe Interface
  • Two PCIe x4 Interface
  • Six USB 2.0 Ports: two native, and four via an on-board Hub
  • Three RS-232 UART Interfaces, via DB9 connector



    Pactron can customize industrial design, hardware and software for your specific needs:

  • Single Board Computer
  • Proxy Server
  • Security
  • Point of Sale (PoS)
  • Industrial controller
  • Access Point
  • Router
  • VPN
  • Storage


How to buy?

To purchase the Sherwood Development Kit, please visit Pactronstore


About Pactron Inc.:

    Pactron designs and develops comprehensive and robust embedded systems that provide storage, wireless, mobile, networked, audio video, and Internet-connectivity for OEM markets. Pactron delivers integrated hardware and software platforms that are incorporated into end-to-end solutions, providing its customers minimized risk, accelerated time-to-market, reduced development costs, and enhanced design architecture.



For additional information, please send email to systemsolutions@pactroninc.com


88AP510 Q7 Module

Pactron offers the Industry’s first Q7 Module based on Marvell’s ARMADA™ 510 system-on-chip (SoC). 88AP510 is a highly integrated, low power SoC with an ARM v6/v7-compliant superscalar processor core, hardware graphics processing unit,...more

Q7 Carrier Board

Pactron’s Q7 Carrier Board meets the new Q7 Specification Revision 2.0, released on September 2012. It is targeted for the hardware and software validation of ARM processor based Q7 CPU modules. This compact version includes 2x USB 3.0 interfaces,...more

FX3 Camera Board

As a Design Partner of Cypress Semiconductors, Pactron has done custom designs based on FX3™, the new SuperSpeed USB 3.0 Peripheral Controller from Cypress. The FX3 Camera Board was developed to demonstrate FX3’s video streaming capability... more

FX3 FPGA Dev Board

Pactron’s FX3 FPGA Dev board a Development kit for Cypress’s FX3 device has the next-generation Super Speed USB 3.0 peripheral controller at its heart. This powerful & compact development board is designed to interface with standard FPGA boards...more

Birchwood Dev Kit

The Birchwood System is a low power development / evaluation platform based on the high performance Marvell’s Armada 300 88F6282 ARMv5TE compliant core with integrated...more

Sherwood – Armada XP Development

The Sherwood Development kit is a Highly Integrated Multi-core ARMv7 based SOC development/evaluation platform based on the high performance Marvell’s Armada XP MV78460 ARMv7 Quad core with integrated 2MB L2 cache that can runup to 1.6 GHz... more

Riverwood Evaluation Platform

Riverwood is a development / evaluation platform based on Marvell’s Armada 385 which has ARMv7 high performance dual core CPU technology with integrated 1MB shared L2 cache that can run up to 1.6 GHz per core .The Armada 385 SoC caters a new level of performance...more



Reference Design Development

Working in conjunction with Applications Engineering and Product Marketing groups at its semiconductor clients, Pactron develops Customer Reference Boards, Evaluation Boards and Reference Design....more


ATE Solutions

Pactron’s expertise in the design and manufacture of ATE board hardware runs both broad, and deep. Pactron has specialized design teams with knowledge and experience across all the major tester platforms....more


Reliability Engineering & Burn-in

Pactron provides an end-to-end solution for your Reliability and Burn-In requirements. With established expertise in Burn-In board (BIB) design for major Burn-In systems, Pactron seeks to provide innovative....more


Product Engineering Solutions

Pactron, in conjunction with its clients covers the entire product development lifecycle. We transform your product ideas to marketplace success with our comprehensive product development services....more


Contract Manufacturing & NPI

Pactron is an ISO 9001 registered full service Contract Manufacturer (CM), committed to the highest standards of excellence in quality and manufacturing. In conjunction with its NPI services....more


ODM Solutions

By bundling its product engineering and design capabilities with its strong manufacturing infrastructure, Pactron offers customers a full ODM solution for a variety of technology platforms....more

Hi-Tech Website Design